Hole Making - Drilling

Home > Products > ISCAR > Hole Making > Hole Making - Drilling

DR-CA-N : Large diameter drills with cartridges. Each drill is supplied with several shim plates. B

DZ-2.25XD (23-55 mm 2.25xD) : DZ indexable serrated insert drills. Drilling depth 2.25xD.

DZ-3XD (23-38 mm 3xD) : DZ indexable serrated insert drills. Drilling depth 3xD.

DZ-4XD (23-33 mm 4xD) : DZ indexable serrated insert drills. Drilling depth 4xD.

DZ-3XD-CF (25 & 32 mm 3xD) : Drills with CLICKFIT adaptation using triangular inserts with a se

A-SXFOR-DR : Boring and drilling bars with coolant holes using XOMT inserts.

DR-MF-2.25D : Multifunction drilling, boring, facing and external turning tool.

DDT-E1 : Deep double tube conuterborer without a through hole, external 4 start thread connection a

SCD-AP4 (0.8-2.9 mm 4xD) : Solid carbide drills without coolant holes. Drilling depth 4xD (DIN 6537

SCCD-AP5 : 3 flute solid carbide drills without coolant holes. Drilling depth 5xD (DIN 6537).

SCD-AP5 (3-20 mm 5xD) : Solid carbide drills without coolant holes. Drilling depth 5xD.

SCD-AP6 (0.8-2.9 mm 6xD) : Solid carbide drills without coolant holes. Drilling depth 6xD (DIN 6537

1 2 3 4 5